住宅区节点和网络

Network connecting the end-users

FTTx Product and solutions standard image

Number 4 Number 5
住宅区节点 住宅区网络 用户节点


Property Area Node Number 4

用于住宅区的连接盒WTC0.5:
检修孔或空中配电的FTTH最终引出线。最多容纳48个接头和24个链接器(SFF)。全力学水密系统,单侧最多容纳12条电缆引出线


结构紧凑的最终引出线

Property Area Node img1

用于多体物业区域的室内转换想( ITB) :
配电电缆的接续能力最高达96.2;入—3个多电缆接口—出;壁装式,保护指数IP54。

建筑和楼层配置的紧凑转换点

Property Area Node img2

 用于商业中心和多体物业区域的Cros Plus 1 & 2:
安全的室内光纤接线箱。容纳48至96个接头。单光纤管理配备标准盒或FiberArtTM。电缆从顶部或底部进入。管道和跳线超长管理。保护指数IP54。

安全分界点

Property Area Node img3

Cros 用于低密度多体物业区域或楼层配置:
室内最终分配点。最多容纳12个接头和12个连接器。电缆从顶部或底部进入。保护指数IP30。载波和用户的两键安全系统,壁装式。


安全、高度紧凑的分界点

Property Area Node img4

室内配电箱DB:
接续和跳线功能。最多容纳12个连接器。
与微管完全兼容。中跨接入中的未切微管和微缆。IP30。

紧凑性,灵活性


Poperty Area Node img5

预端接多功能子架KB112:
完整的19”交叉连接解决方案,放置与用户定制长度(10至300米)的适当电缆一起交付的工厂装配SC、LC、FC和ST连接器。

安装迅速、可靠性强,用户友好

Property Area Node img6

Property Area Network

地下设备

B-Lite UT - fiber-微光纤:
直径极小的分接电缆,最多包含4条光纤。低摩护套的电缆设计安装在微管中。


用于气吹直至终端用户

Property Area Network img 1

 室内/室外带状电缆:
包含4条光纤带的带状HFFR铠装分接电缆,最多包含12条光纤,用于安装在地下管道中。

卓越的力学性质,使用带状技术接续节省成本和时间。

Property Area Network img 2

Indoor hybrid optical/electrical cables:
low pair count copper cables, CAT3 or CAT5, fitted with a single loose tube with single mode fibers. PVC or HFFR sheath for indoor use.
For highspeed Internet access and Triple Play while maintaining POTS service and guaranteeing security and environmental protection
Property Area Nertwork img3


Aerial installation

Aerial drop cables:
all-dielectric self-supporting based on circular and figure-8 designs with 2 fibers. Available with factory assembled connectors for preterminated drop access.
Reduced OPEX for progressive deployment of home connections

Property Area Network img4

Property Node Number 5

Customer Premises Equipement (CPE) for residential and multidwelling areas:
WAN connection 100Base FX built-in O/E converter MT-RJ, SC or LC. Home-networking connection with 4 ports, each 100 Mbit/s for Triple Play and 2 analogue telephone lines. V-LAN and QoS for real-time services support.
Symmetrical 100Mbit/s Fast Ethernet connection

Poperty Node img1

FiberSwitch for business center area:
fiber-optic uplink according to IEEE802.3u 100BASE-FX with SC, ST, MT-RJ or VF45 dual fiber or single fiber connection. 4 RJ45 User ports. Supports VoIP telephone, wireless access points and terminal equipment connected via RJ45. Power over thernet option.
Optimum for FTT Office connection

Property Node img 2

Passive wall-mounted fiber outlet:
up to 4 fibers terminated with SC or LC. Available with factory assembled connectors as pre-terminated solution.
Fast installation and high performance

Property Node img3

Files (attachements)