Splice Closure DCS M 2/3 FiberArt

Watertight dome closure for Optical Fibre

• Fully mechanical watertight system,
• 4 StandardCable port, each for up to 12 cables
• Butt Mid-Span Cable port
• Up to 288 (DCST2) or 576 (DCST3) H/S Splices,
• Up to 48 (DCS2) or 96 (DCS3) Single-Circuit trays.

Application

Cabling configuration :

• Standard,

• Butt Mid-span.

(All available for aerial, buried, duct, or wall mounted applications).

Fiber management :

FiberArt modules integrate 12 splice trays for up to 6 HS splices each, allowing single fibre management.

All configurations are modular and allow easy upgrades.

Grounding :

• Standard grounding assures electrical continuity between all cable ports (an external grounding plug is also available).

Cable anchoring :

• 3 points cable clamps for extremely high cable retention, or simplified 1 point anchoring systems are available.

The main functions are :

• to protect splices and bare fibers from the environment and unwanted handlers,

• to efficiently and easily store, manage and identify FO splices and fibers.

Conception

Sealing system :

• Fully mechanical sealing system for reduced installation and re-entry time.

The dome, sealed with a gasket, can be easily installed and removed without special tools or torque control.

• Cable sealing devices based on a mechanical compression system : this allows to re-use all components for future upgrades or re-access to the closure.

(No tape, glue, heat-shrink tubes, or cable jacket preparation is needed). 

• Fully mechanical sealing system for reduced installation and re-entry time.
  The dome, sealed with a gasket, can be easily installed and removed without special tools or torque control.
• Cable sealing devices based on a mechanical compression system:
  this  allows to re-use all components for future
  upgrades or re-access to the closure.
  (No tape, glue, heat- shrink tubes, or cable jacket preparation is needed).

Cable anchoring

3 points cable clamps for extremely high cable retention, or simplified 1 point anchoring systems are available.

Fiber management

Grounding

Standard grounding assures electrical continuity between all cable ports (an external grounding plug is also available)

Cabling configuration

• Standard
• Butt Mid-span

(All available for aerial, buried, duct, or wall mounted applications)

DCSM2 Mechanical sealing system

DCSM2 With 4 FiberArt modules

• Up to 288 Heat-shrink splice protections, organized in 4 FiberArt modules, i.e. 48 splice trays
  (Each tray can manage up to 12 splices)

• Up to 576 Heat-shrink splice protections, organized in 8 FiberArt modules, i.e. 96 splice trays
  (Each tray can manage up to 12 splices)

• 4 Standard ports
• 1 twin butt mid-span port  

 See the Sealing product range datasheet for the number and diameter of cable

• Straight splicing
• Butt mid-span

Link to e-catalogue

• WTC Slim
• BlackBox
• OutDrop
• MCO
• ODO 

Link to KINOPTIC™ & Application Notes

• KINOPTIC™ home page
• Underground - Blowing
• Facade - Extraction
• Pole - Pulling & winding
• Power and Fiber
• Advanced Networks