RWE Deutschland, Nexans and KIT launch “AmpaCity” project: the world’s longest superconductor system to replace inner-city high-voltage cable

Field test in the RWE distribution network to highlight the technical and economic ad-vantages of superconductors over high-voltage solutions in congested areas

Paris, January 19, 2012 – The “AmpaCity” project has been kicked off: The RWE Group and its partners are just about to replace a 1-kilometre-long high-voltage cable connecting two transformer stations in the Ruhr city of Essen with a state-of-the-art superconductor solution. This will mark the longest superconductor cable installation in the world. The three-phase, concentric 10 kV cable will be produced by Nexans and is designed for a transmission capacity of 40 megawatts. As part of this project, the Karlsruhe Institute of Technology will analyse suitable superconducting and insulating materials. This installation will also be the first to combine a superconducting cable with a resistive superconducting fault current limiter for overload protection. The limiter will be manufactured by Nexans unit specialized in superconductors, located in Huerth, Germany.

The project could herald a whole new dimension in the restructuring of inner-city networks. Following the successful completion of a two-year field test, it would be possible to install 10 kV superconducting links in large sections of the backbone of the Essen distribution network as part of efforts to release from high-voltage installations. In the medium term, this would lead to greater efficiency as well as lower operating and maintenance costs while simultaneously reducing land use. The dismantling of numerous 110/10 kV transformer stations would help to free up valuable space in inner-city areas. Thanks to the distinctive nature and ambitions of AmpaCity, the project is being supported by the energy research department of the Federal Ministry of Economics and Technology (BMWi). Research project total costs are approximately €13.5 million including government-funded €6 million.

Study highlights the economic efficiency of superconductors

The project was preceded by a detailed study in which a number of research institutes, under the leadership of the Karlsruhe Institute of Technology, worked alongside with the project partners Nexans and RWE to analyse the technical feasibility and economic efficiency of a superconductor solution at medium-voltage level. The study revealed that superconducting cables are the only reasonable alternative to high-voltage cables in city networks and that their use would mean that resource- and land-intensive transformer stations could be demolished. Although copper medium-voltage cables could also be used in inner-city areas to transmit high power, the cost efficiency of this solution would be cancelled out by the much higher ohmic loss. Furthermore, conventional medium-voltage cables for the Essen project are also out of question, as they require much more routing space: instead of a single 10 kV superconductor cable, five copper cables would need to be laid in parallel – often a largely impossible task given the limited space under the city streets.

Efficiency technology to soon compete with conventional solutions

State-of-the-art high-temperature superconductors (cooled with liquid nitrogen) such as those used in AmpaCity have been ready for deployment in energy-related applications for some years now, although they have yet to be used on a large scale. Thanks to improved production processes, superconducting wires are only now available in sufficient lengths and quantities. Superconductivity is an efficiency technology because it helps to protect material and energy resources. Experts anticipate that these innovative cables will soon be in a position to compete with copper solutions in energy-intensive applications. The BMWi understands superconducting equipment as an important component of future energy supply concepts.

Technical superiority of ice-cold conductors

The technical predominance of superconducting cables can be attributed to the material properties of the conductor. At temperatures of around -200°C, the material is transformed into an almost perfect electrical conductor being able to transport at least 100 times more electricity than copper. Despite the cooling jacket, the compact design of the superconductor means that it can transport five times the electricity as a similarly sized copper cable – and with much fewer electrical losses.

RWE Deutschland, Nexans and KIT launch “AmpaCity” project: the world’s longest superconductor system to replace inner-city high-voltage cable

In order to reach its ideal conducting temperature, the concentric superconducting cable is cooled with liquid ni-trogen. Thus it can conduct high currents with minimal loss and smaller cross-sections than an adequate copper cable (Photo: Nexans)

联系人

Angéline Afanoukoe 新闻部
电话 +33 1 78 15 04 67
Angeline.afanoukoe@nexans.com
Michel Gédéon 投资者关系部
电话 +33 1 78 15 05 41
Michel.gedeon@nexans.com

关于耐克森

以能源为发展核心,耐克森作为全球电缆业的领先者,提供全系列的电缆和电缆系统,并成为基础设施、工业、建筑业和局域网(LAN)四大市场的世界性重要角色。从能源、交通运输、电信网络到造船、石油和天然气、核能、汽车、电子、航天、物料搬运到自动化,耐克森的电缆无处不在。 作为负责的工业公司,耐克森将可持续发展视为其全球和运营战略中不可或缺的部分。产品、解决方案和服务的不断创新,员工的发展和敬业,以及引入减小环境影响的安全工业过程,这些重要举措树立了耐克森可持续未来发展的核心地位。 耐克森在全球40个国家设有工厂,业务遍及全球,共拥有23,700名员工。2010年销售额达60亿欧元。耐克森集团在巴黎股票市场上市,更多信息请查询www.nexans.com