SIWO-KUL B10 1x16 3,3/4,2kV RD
EAN 13 7611755007393
标准国际标准 : IEC 60092;IEC 60331;IEC 60332-1;IEC 60332-3;IEEE 383;LLOYDS Reg. 91/00126(E1);UIC 895;VERITAS N°09555/A0 BV ACE1/723 PC 2502H
国家标准 : BSS 6195-T5-C-D-E-F;DIN VDE 0472;NF F 16-101/BF1
SIWO-KUL® B10 cables are required when high flexibility and high temperature conditions are present; they are mainly used in medium-voltage motors and generators for connecting stator coils to the terminal box. They are also vital elements for wind converters, transformers, solar power inverters and other MV/LV cabinets. In drives, silicone decreases copper cross-section and gives flexibility for compactness.
SIWO-KUL® B10 3.3/4.2 kV cables are class 5 single core cables.
This product family is designed with a PET braid, PUR varnished providing our customers much flexibility according to their process (VPI…).
- Copper conductor tinned, flexible IEC 60228, class 5
- Silicone rubber insulation
- Separator tape
- Protective synthetic yarn braiding, PUR varnished
The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength. The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechanical protection by maintaining good flexibility.
Operating temperature for continuous service extends from –55°C up to 180°C.
This product family is also part of our Windlink® offer for Wind turbines.
These cables are UL (Underwriters Laboratories inc.) approved for Appliance Wiring Material (AWM), following styles 3640, 3641, 3642 and 3643, CSA File No.: 036040-0-000.
SIWO-KUL® B10 cables are in compliance with EU directives on the limits of certain metals and waste as defined on ROHS (Restriction of Hazardous Substances) and WEE (Waste from Electrical and Electronic Equipment).
SIWO-KUL® B10 is REACH conform substances benzene, C10-C13).
|结构类型||119 x 0.40|
|直径精度||+/- 0.3 mm|
|最大工作电压，范围||0. .. 20.kV|
|Breakdown field strength (kV/mm)||> 20|
|Dielectric constant relative value (indicative)||3.50|
|Loss factor tan d||< 10-2|
|Minimum Tensile Strength||8.0MPa|
|Elongation at break of insulation (%)||> 250|
|操作温度，范围||-55 .. 180°C|
|气体腐蚀性||IEC 60754-1, IEC 60754-2|
Our SIWO-KUL® B10 cables have been printed:
NEXANS SWITZERLAND SIWO-KUL® B10 + voltage in kV + section in mm² + Standards + Meter marks