GigaSwitch V5 7 Port 54VDC Series

Products

Description

Description

 

LANactive 7 Port Managed Full Gigabit Ethernet FTTO Switch

  • 3 Uplink Ports
  • Power over Ethernet (PoE+), up to 150W
  • Efficient Energy Management
  • Memory Card Slot
  • Input voltage range 46 … 57V DC

 

Nexans LANactive GigaSwitch V5 series is designed for the installation in Fibre to the Office (FTTO) networks. The latest generation of FTTO switches is equipped with a state-of-the-art network processor and provides enhanced performance, security and redundancy functionality.

 

7 Port Version

The GigaSwitch version with seven ports is part of the latest V5 series. This special variant with three uplink ports allows a redundant connection of the GigaSwitch via fibre optic. The RJ45 uplink can be used for connecting an additional Wireless LAN Access Point. All uplinks support Link Aggregation for providing redundancy and double bandwidth up to 2Gbps.

 

Snap-In Installation

The very compact design of the GigaSwitch allows a tool-less snap-in installation into the standard 45 mm cable duct systems or floor boxes without special mounting accessories.

 

Power over Ethernet

Up to 5x connected Ethernet devices can be supplied with Power over Ethernet. According to the latest IEEE 802.3at (PoE+) standard, up to 30 watts per port are available for each connected device, with total budget of 150 watts.

 

Memory Card

The optional memory card automatically saves the complete current configuration and firmware of the device. In case of failure, this feature allows an easy exchange of the hardware without additional configuration. In addition, each memory card can be delivered with its own MAC address that is adopted by the switch.

 

Switch Management and Zero-Touch Configuration

Nexans LANactive Manager allows a simple and secure configuration of all device parameter of the GigaSwich series. With LANactive Manager a larger number of GigaSwitches can be managed and monitored at the same time. In combination with Nexans Zero-Touch Configuration, LANactive Manager allows automatic distribution of configurations and firmware updates. A pre-configuration of the switches is not necessary.

Diagnostic Functions (Interfaces)

Digital Diagnostics Monitoring Interface: Yes

Twisted Pair Cable Diagnostic: Yes

General

Dimensions [W x H x D]: 96mm x 45mm x 69mm

Installation Depth: 35mm

Material: zinc diecasting / stainless steel

Colour: Pure White, like RAL 9010

Ambient Temperature: Operation: 0 ... 45°C, Storage: -20 ... 85°C

Relative Humidity: 20 ... 90% (non-condensing)

Weight: 290g

MTBF: > 750,000h

Power Supply

Input Voltage: 46 … 57V DC (typ. 54V DC)

Power Consumption: 4.9W (standby) … 5.3W (typ.) ... 6.5W (fully connected)

Heat Output: 23Btu(IT)/h

Connector: 3-pin connector with plug-in screw terminal (up to 2.5mm²) / (+) (-) (FPE)

CE - Conformity

Electro Magnetic Capability Directive: 2014/30/EU

Low Voltage Directive: -

RoHS: 2 2011/65/EU

Engineering Standards: EN 62368-1, EN 55032, EN 55024, EN 50581

Switching Parameters

Switching Type: Store-and-Forward, self-learning

Max. Frame Size: 9.600Bytes (Support of Jumbo frames)

Packet Buffer: 512kBytes

Latency (RFC1242): 100Mbps / 64Byte (FIFO/LIFO) 9μs / 9.3μs | 100Mpbs / 1518Byte (FIFO/LIFO) 125μs / 4μs | 1000Mbps / 64Byte (FIFO/LIFO) 2.7μs / 2.2μs | 1000Mpbs / 1518Byte (FIFO/LIFO) 15μs / 2.5μs

MAC-Address Table: 8.192 MAC-Addresses

VLANs: IEEE802.1q with up to 256 Groups

Quality of Service Layer 2: IEEE802.1p Class of Service (4 Queues per Port)

Quality of Service Layer 3: RFC2474/3168 DSCP (4 Queues per Port)

Bandwidth Limitation: Bitrate and Number of Packets

Fabric Attach: Basic Fabric Attach Client Support

Management

Management: On-Board High-Performance Management

LEDs: Management, Port Status and Activity, Memory Card

Zero-Touch Configuration: Via LANactive Management

IP-Address: IPv4, IPv6

DHCP-Client: DHCP, DHCPv6

DHCP Relay Agent: Yes

File Transfer: TFTP, SCP

Console Port: V.24 with Nexans Console Cable

Web-Interface: HTTP, HTTPS

Command Line Interface: SSH, Telnet

SNMP: SNMPv1, v2c, v3

Further Management Protocols: Syslog, LLDP, LLDP-MED, CDP

Time Synchronisation: SNTP

Port Statistics: Detailed per Port

Redundancy

Redundancy Protocols: STP, RSTP, MSTP, MRP

Link Aggregation: LACP

Security

Password Protection: Two Access Levels (R/W or R/O)

Authentication via Radius: CLI and LANactive Management

Authentication via TACACS+: CLI and LANactiver Management

ACL for Management Interface: Up to 16 Access Control Lists

Portsecurity via MAC-Address: Up to 3 predefined MAC-Addresses

Portsecurity via Radius: IEEE802.1x

DHCP Snooping: Yes

Loop and Broadcast Limiter: Yes

Firmware Update: Dual Firmware Image

Configuration Button: Yes (configuration button deactivatable)

Reset Button: Yes (configuration button deactivatable)

Memory Card: Micro SD-Card, optionally with fixed MAC-Address

Resources

Resources

Documentation

联系我们

您需要获得更多信息的话题

必填字段*

请检查您的输入重新尝试

所有的邮箱地址必须包含一个单独的@

个人数据保护

您有权反对将您的个人数据和/或将其用于直接营销或商业目的

谢谢

感谢垂询。我们将尽快和您联系。

错误

发生错误。请重试。

关闭

联系我们

必填字段*

请检查您的输入重新尝试

所有的邮箱地址必须包含一个单独的@

个人数据保护

您有权反对将您的个人数据和/或将其用于直接营销或商业目的

谢谢

感谢垂询。我们将尽快和您联系。

错误

发生错误。请重试。

关闭