GigaSwitch 64x Desk V5 Series

LANactive 6 Port Managed Full Gigabit FTTO Desk Switch

• 2 Uplink Ports (1x SFP, 1x TP or 2x SFP)
• Power over Ethernet (PoE+), up to 120W
• Efficient Energy Management
• Memory Card Slot
• Wide input voltage range 46...57V DC

Nexans LANactive GigaSwitch 64x Desk series enables the secure, switched Gigabit Ethernet networks in the Fibre to the Office (FTTO) environment. The latest generation of FTTO switches is equipped with state-of-the-art processor technology with real-time support and provides enhanced performance, security, redundancy and convenient management functionality.

6 port version
The 6 port GigaSwitch is a part of the latest GigaSwitch V5 series. This special variant with an SFP and Twisted Pair uplink interface allows redundant connections of the switches via the RJ45 port on the back side of the switch. The version with two SFP ports supports link aggregation for providing double bandwidth up to 2Gbps.

Compact design
The very compact and fan-less design of the switch allows easy positioning and integration of systems in and on desks, columns and walls. The GiagaSwitche is powered via an external compact power supply unit.

Power Source Equipment (PSE+)
Thanks to the implemented Power over Ethernet (PoE+) functionalities, devices like VoIP-Phones, Wireless-Access-Points and IP-Cameras can be directly supplied with power from the switch according to IEEE802.3at. The Power over Ethernet functionality can be parameterized, controlled and monitored via management.

Memory Card
The optional memory card automatically save and storage the complete current configuration and firmware of the device. In addition, each memory card has its own MAC address.

Switch Management with Client Server Architecture
The new management platform allows simple and secure configuration from a centralized location. Rapid Spanning Tree, RADIUS, prioritization, security, LLDP, LACP, IGMP, CDP, QinQ, diagnostics and SNMP traps are just some of the implemented features. In combination with Nexans LANactive Manager, a larger number of switches can be managed and monitored at the same time. LANactive Manager allows automatic distribution of master configurations and firmware updates.

Digital Diagnostics Monitoring Interface: Yes

Twisted Pair Cable Diagnostic: Yes

Dimensions [W x H x D]: 148mm x 24mm x 118mm
Material: Metal case
Colour: Pure White, like RAL 9010
Ambient Temperature: Operation: 0 ... 45°C, Storage: -20 ... 85°C
Relative Humidity: 20 - 90% (non-condensing)
Weight: 550g
MTBF: > 750,000h

Input Voltage: 46 ... 57V DC (typ. 54V DC)
Power Consumption: 4.9W (standby) ... 5.3W (typ.) ... 6.0W (fully connected)
Heat Output: 21Btu(IT)/h
Connector: 3-pin connector with plug-in screw terminal (up to 2.5mm²) / (+) (-) (FPE)

Electro Magnetic Capability Directive: 2014/30/EU

Low Voltage Directive: -

RoHS: 2 2011/65/EU

Engineering Standards: EN 62368-1, EN 55032, EN 55024, EN 50581

Switching Type: Store-and-Forward, self-learning

Max. Frame Size: 9.600Bytes (Support of Jumbo frames)

Packet Buffer: 512kBytes

Latency (RFC1242): 100Mbps / 64Byte (FIFO/LIFO) 9μs / 9.3μs | 100Mpbs / 1518Byte (FIFO/LIFO) 125μs / 4μs | 1000Mbps / 64Byte (FIFO/LIFO) 2.7μs / 2.2μs | 1000Mpbs / 1518Byte (FIFO/LIFO) 15μs / 2.5μs

MAC-Address Table: 8.192 MAC-Addresses

VLANs: IEEE802.1q with up to 256 Groups

Quality of Service Layer 2: IEEE802.1p Class of Service (4 Queues per Port)

Quality of Service Layer 3: RFC2474/3168 DSCP (4 Queues per Port)

Bandwidth Limitation: Bitrate and Number of Packets

Fabric Attach: Basic Fabric Attach Client Support

Management: On-Board High-Performance Management

LEDs: Management, Port Status and Activity, Memory Card

Zero-Touch Configuration: Via LANactive Management

IP-Address: IPv4, IPv6

DHCP-Client: DHCP, DHCPv6

DHCP Relay Agent: Yes

File Transfer: TFTP, SCP

Console Port: V.24 with Nexans Console Cable

Web-Interface: HTTP, HTTPS

Command Line Interface: SSH, Telnet

SNMP: SNMPv1, v2c, v3

Further Management Protocols: Syslog, LLDP, LLDP-MED, CDP

Time Synchronisation: SNTP

Port Statistics: Detailed per Port

Redundancy Protocols: STP, RSTP, MSTP, MRP

Link Aggregation: LACP

Password Protection: Two Access Levels (R/W or R/O)

Authentication via Radius: CLI and LANactive Management

Authentication via TACACS+: CLI and LANactiver Management

ACL for Management Interface: Up to 16 Access Control Lists

Portsecurity via MAC-Address: Up to 3 predefined MAC-Addresses

Portsecurity via Radius: IEEE802.1x

DHCP Snooping: Yes

Loop and Broadcast Limiter: Yes

Firmware Update: Dual Firmware Image

Configuration Button: Yes (configuration button deactivatable)

Reset Button: Yes (configuration button deactivatable)

Memory Card: Micro SD-Card, optionally with fixed MAC-Address